1.3 inch Display TFT IPS with ST7789 – 240×240 pixel – SPI

CAD 7.50

Need more than we have? Order now, we will ship when back in stock. Lead time about 2-3 weeks.
See our backorder policy.
Availability: In stock (can be backordered) SKU: 26469
Quantity 3 - 9 CAD 6.75
Quantity 10 - 24 CAD 6.56
Quantity 25 + CAD 6.38

Description

Graphic Displays

1.3 inch Display
1.3 inch Display
1.3 inch Display
1.3 inch Display
1.3 inch Display

Type

LCM12864

GREEN

LCM12864

BLUE

2.4" Arduino
Touch Color

1.28" TFT IPS
Color

1.3" TFT IPS
Color

LED Backlight

yellow

white

yellow

white

white

Resolution (Pixel)

128 x 64

128 x 64

320 x 240

240 x 240

240 x 240

Interface

SPI, parallel

SPI, parallel

parallel

SPI

SPI

Controller

ST7920

ST7920

SPFD5408

GC9A01

ST7789

Touch screen

Part # (Go to)

1.3 inch Display with IPS Panel and 65k colours connects through its SPI interface with your microcontroller.

The ST7789 TFT display controller requires 3.3V power supply and logic level.

The backlight control pin BLK is low-active.

Please note: The 1.3 inch Display TFT module doesn’t have a Chip-Select pin.

  • Module dimension: 28 x 39mm
  • Screen dimension: 23 x 23mm
  • Mounting holes: 2mm

Like always, libraries for ST7789 TFT (for example for Arduino) are available on GitHub.

 

1 review for 1.3 inch Display TFT IPS with ST7789 – 240×240 pixel – SPI

  1. 5 out of 5

    m.p (verified owner)

    This display is bright, sharp, and has a wide viewing angle (both up/down and left/right).

    As the description states, it’s 3.3V, and it’s SPI despite the data and clock pins being labelled SDA and SCL on the one I received. I connected it to a 3.3V Arduino Pro Mini using the following pins:
    – GND -> GND
    – VCC -> VCC
    – SCL -> 13 (SCK)
    – SDA -> 11 (MOSI)
    – RES -> 9
    – DC -> 8
    – BLK -> no connection

    There are several popular libraries out there that work with this display. It took me a little longer to get it working than I expected but that was because with no CS pin, the SPI mode needs to be set to SPI_MODE2. With that set, it works like a charm!

    This display (like many others) is very fragile and will be damaged if it’s not protected. The one I received came in a small plastic box that no longer fit when I soldered the pins on so I cut a small hole in the box so the pins could stick through.

    Long story short: it looks great, it’s 3.3V, use SPI_MODE2, and the price is very good.


Add a review