2.42″ OLED Graphic Display SSD1309 128×64 SPI Blue
EUR 19.65
Backorder not available during sale.
No free item if only 2 left in stock. |
- Description
- Reviews (0)
Description
The 2.42″ OLED Graphic Display SSD1309 does not require a backlight, performs in a much wider temperature range than LCD, is capable of I2C and SPI (default) communication and requires only 2.8-3.3V supply voltage.
The driver chip on the 2.42″ OLED Graphic Display SSD1309 is the very common and well-documented SSD1309, by default operating in SPI mode (much faster than I2C).
The communication standard of the 2.42″ OLED Graphic Display SSD1309 can be changed to I2C by removing/adding resistors on the back of the module. Please refer to the SSD1309 datasheet for information about selecting the communication interface standard.
- Driver IC: SSD1309 (datasheet)
- Interface: 7-pin, I2C or SPI (default)
- Display colour: blue on black background
- Operating temperature: -40 to +70C
- Operating voltage: 2.8-3.3V
- Viewing angle: 160 degrees
- Module dimensions: 72 x 43.5mm
- Mounting holes: 39 x 68 mm, d=2.8mm
- Viewing area: 55 x 27.5 mm
The display works, for example with U8GLIB (select SSD1306 driver) for Arduino. SparkFun also offers a library on GitHub.
Be the first to review “2.42″ OLED Graphic Display SSD1309 128×64 SPI Blue”
You must be logged in to post a review.
Related products
-
-
-
-
24 x WS2812B RGB LED Ring, fully addressable, 86mm
0 out of 5 -
Acrylic Enclosure for LCD 1602 16×2
5.00 out of 5 -
8×8 64-Dot-Matrix (Red) MAX7219, 4 Module Cluster
0 out of 5 -
OLED 128×64 Pixel, I2C, 0.96 inch, SSD1306 SH1106, 3-5V
5.00 out of 5 -
4 digit LED 7-segment display, serial interface, TM1637
5.00 out of 5
Reviews
There are no reviews yet.