3 x CANADUINO Breadboard Buddy – Compatible with Arduino UNO and NANO – incl. USB Adapter
|Closed for Xmas Holidays 12/12 – 01/06.
Except on 12/26 for Boxing Day Special.
No backorders accepted until 01/06/2024.
- Additional information
- Reviews (2)
CANADUINO Breadboard Buddy V2 development board DIY soldering kit is very easy to assemble and only requires basic soldering skills.
This is a set of 3 of our breadboard development modules, together with a USB programming adapter with CH340G chip.
These modules are your first choice when it comes to developing your projects on a breadboard. BBB V2 saves you a lot of breadboard space and development time. When you are done developing, just take the chip out and move it over to your Arduino UNO board, or any other application.
CANADUINO Breadboard Buddy V2 has the typical 2 LEDs for power and D13, and the reset button on board. The Atmel MCU is already programmed with bootloader and “blink” sketch.
It has 2 LEDs for power and D13 – typical for microcontrollers, especially Arduinos. BBB V2 has a 5-pin header to connect the included USB adapter for easy programming or to establish a serial RX/TX connection to any other peripheral device.
Since there is no voltage regulator on board, the power supply must be 4.5 to 5.5V (see Atmel ATmega328P-PU datasheet for details). 3.3V power supply works as well but is out of specs for the Atmel MCU.
We recommend downloading the required USB driver for your operating system from WCH official website.
Digital LED Clock 6-Digit, DIY kit based on AT89C20515.00 out of 5
Sound activated LED light effect – DIY soldering kit with CD40170 out of 5
Pocket FM Stereo Radio DIY Soldering Kit 76-108MHz4.00 out of 5
Digital Function Generator DIY Soldering Kit with Exar XR-22065.00 out of 5
Audio Level Indicator LED VU Meter DIY Soldering Kit0 out of 5