Parts Kit for “Arduino on a breadboard” with DIP socket
FREE Canada & USA shipping available (see details)
Arduino-on-a-breadboard parts kit. This kit includes everything you need to realize your first “blink” project on your breadboard. Or you just solder the parts together “flying”. Just connect a battery between 3.5 and 5V, and the LED will start fading in and out.
These Arduino breadboard parts are the absolute minimum.
Included in the kit is:
1 x MCU ATmega328P-PU with Bootloader for Arduino installed
1 x DIP28 socket for MCU
1 x Crystal 16MHz
1 x Capacitor 100nF blocking capacitor
1 x Resistor 10k (pull-up for reset line)
1 x Resistor 330-1000 Ohm (LED current limiter)
1 x LED 3mm (different colours)
1 x Reset button
The schematic is shown in the pictures.
We recommend our CH340 USB-TTL adapter for programming your Arduino with Arduino IDE using a USB connection to the host computer:
2 x Load capacitor for the crystal (39pF)
We have the same kit with a ZIP socket instead of the DIP-28 socket, for more comfort when you want to reprogram your microcontroller frequently. Alternatively, we have a similar kit including a solderless breadboard 400 or 830 and a voltage regulator module.
Specification: Parts Kit for “Arduino on a breadboard” with DIP socket