ESP8266 Arduino Wifi Shield WeMos D1 and Arduino IDE compatible
ESP8266 Arduino Wifi Shield WeMos D1 and Arduino IDE compatible
$ 7.99
In stock
| Range | Discount |
| 5 - 9 | 10 % |
| 10 - 999 | 15 % |
ESP8266 Arduino Wifi Shield WeMos D1 and Arduino IDE compatible, 32 bit, 4MB flash, 80MHz, Internet Of Things, web server
This very popular 2.4GHz Wifi module (802.11b/g/n) is almost 10 times faster than an Arduino Uno, and comes with plenty of memory. After installing the board file, the Arduino IDE can be used to develop and upload programs to the Wifi module. The header can be used to attach other Arduino shields. The on-board switching power supply can operate on input voltages upt to 24VDC.
Attention: This is a 3.3V logic level device!
The D1 is a WiFi capable ESP8266 based development board in the form of the Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU. The D1 also features an on-board switching power supply which allows you to power the board from a power supply up to 24V, 11 GPIO pins (can be used as input/output/PWM/I²C, except D0), and 1 analog input. The PWM resolution is 10bit (1MHz frequency). The integrated 5V switching power supply (1A) is followed by an 3.3V LDO to supply power for the Wifi module and the 3.3V output (power supply for sensors and shields). Please pay attention when you connect other active periphery to the I/O pins, because this is a 3.3V logic level device and higher levels on any pin will destroy it. The max. input voltage for the analog pin is 3.2V.
Share this:
| Weight | 0.045 kg |
|---|---|
| GTIN | 4260474030460 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.