OLED Display 0.96 inch 128×64 with SPI interface – 3-5V

USD 4.40

Need more than we have? Order now, we will ship when back in stock. Lead time about 2-3 weeks.
See our backorder policy.
Availability: In stock (can be backordered) SKU: 26377 Tag:

Description

This tiny 128×64 Pixel OLED display shows white pixels on a dark blue background. It communicates through its SPI interface with any microcontroller platform for example Arduino or ST32. Please watch the YouTube video (link below) to see how it works.

Thanks to its operation and logic level voltage of 3-5V, this Display hooks up to any Arduino board without voltage compatibility issues.

These displays can come with an SSD1306 or SH1106 controller. Both models are very similar, but not identical. We recommend a library that supports both (see below). Then you can easily figure out which setting to use.

  • Shows characters and graphics.
  • Arduino library is available.
  • 128 x 64 pixel, white/blue
  • PCB size: 27 x 28 mm
  • Screen size: 22 x 12 mm (0.96 Inches)
  • Power consumption: <40mW
  • Data interface: SPI
  • This Display has no Touch-Function.

SPI Interface Pinout:

D0 = clock
D1 = MOSI
DC = data/command
CS = chip select
VCC = 3.3 – 5V
RES = reset
GND = ground

Note: We recommend not using the library from Adafruit due to its incompatibility with the SH1106 controller. Here is a better library, supporting different controller models and definitely works with both controller types: 

Reviews

There are no reviews yet.


Be the first to review “OLED Display 0.96 inch 128×64 with SPI interface – 3-5V”