WEMOS D1 Mini Motor Shield

CAD 8.50 CAD 6.80

Victoria Day Sale
ends May 20th

Availability: In stock SKU: 26215


The motor driver shield for the D1 Mini Motor Shield and compatible modules communicate through the I2C bus with the MCU, which only requires 2 GPIO ports.

I2C interface
Power supply voltage: VM=15V max
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short brake/stop motor control modes

Pin description:

VM: Motor power supply + (Max 15Vdc)
GND: Motor power supply
A1 A2: Motor A
B1 B2: Motor B
S: Standby control port (in IO mode)
Standby control mode
I2C mode: Control TB6612s STBY with I2C protocol
IO mode: Control TB6612s STBY with S pin
Shield reset mode
short: reset with d1 mini (reset at power on or press d1 minis reset button)
open: reset by DTR pin.

Example codes for Wemos D1 Mini Sensors and Modules (GitHub)

Another source for Wemos D1 Mini compatible Arduino libraries (GitHub)


There are no reviews yet.

Be the first to review “WEMOS D1 Mini Motor Shield”