WEMOS D1 Mini Motor Shield
0 out of 5
CAD 8.50 CAD 6.80
Victoria Day Sale
ends May 20th
Availability: In stock
SKU: 26215
- Description
- Reviews (0)
Description
The motor driver shield for the D1 Mini Motor Shield and compatible modules communicate through the I2C bus with the MCU, which only requires 2 GPIO ports.
I2C interface
Power supply voltage: VM=15V max
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short brake/stop motor control modes
Pin description:
VM: Motor power supply + (Max 15Vdc)
GND: Motor power supply –
A1 A2: Motor A
B1 B2: Motor B
S: Standby control port (in IO mode)
Standby control mode
I2C mode: Control TB6612s STBY with I2C protocol
IO mode: Control TB6612s STBY with S pin
Shield reset mode
short: reset with d1 mini (reset at power on or press d1 minis reset button)
open: reset by DTR pin.
Example codes for Wemos D1 Mini Sensors and Modules (GitHub)
Another source for Wemos D1 Mini compatible Arduino libraries (GitHub)
Be the first to review “WEMOS D1 Mini Motor Shield”
You must be logged in to post a review.
Related products
-
-
WEMOS D1 Mini DC Power Shield V1.1.0
0 out of 5CAD 2.95CAD 2.36 -
Wemos D1 Mini SHT30 Temperature Humidity Sensor
0 out of 5CAD 5.95CAD 4.76 -
WEMOS D1 Mini Relay Shield 250VAC 10A
4.00 out of 5CAD 3.95CAD 3.16 -
D1 Mini Data Logger Shield with DS1307 RTC and micro-SD slot
0 out of 5CAD 6.90CAD 5.52 -
WEMOS S2 Mini V1.0.0 ESP32-S2 – 2MB PSRAM – 4MB Flash
0 out of 5CAD 11.95CAD 9.56 -
CANADUINO ESP32 S2 Mini V1.0.0 – 2MB PSRAM – 4MB Flash
0 out of 5CAD 7.95CAD 6.36 -
Reviews
There are no reviews yet.