BMP280 Digital Pressure Sensor Breakout Board 1.8-3.6V, Barometer, Altimeter
5.00 out of 5
C$1.79
Availability: In stock (can be backordered)
SKU: 26099
Discount Type | Quantity | Volume Price |
---|---|---|
Quantity discount | 2 - 9 | 5% C$1.70 |
Quantity discount | 10 - 19 | 10% C$1.61 |
Quantity discount | 20 + | 15% C$1.52 |
- Description
- Reviews (2)
Description
The BMP280 digital pressure sensor is a high-precision device that measures atmospheric pressure and temperature. It uses a piezoresistive sensor to accurately measure the pressure, and an on-board temperature sensor to compensate for temperature effects.
The BMP280 communicates with a microcontroller or other host device through an I2C or SPI interface and provides a 16-bit digital output. The sensor can be used as a barometer to measure air pressure, or as an altimeter to determine the altitude based on the atmospheric pressure.
The BMP280 operates on a voltage range of 1.8 to 3.6 V and is suitable for a wide range of applications, including weather monitoring, altitude measurement, and navigation.
The chip can be programmed as a 3 or 4-wire SPI interface, or even as 2 wire I2C bus. With a current consumption of just about 0.003mA, it is perfectly suitable for battery-operated microcontroller applications like mobile data logger. The emerging applications of indoor navigation, health care or GPS refinement require high relative accuracy and a low TCO at the same time. BMP280 is perfectly suitable for applications like floor detection since both sensors feature excellent relative accuracy is 0.12 hPa, which is equivalent to a 1 m difference in altitude.
The size of the PCB is just 15 x 12 x 2.5mm, and the weight is only 0.55g (without header pins). A pin header is included in the shipment, but not already assembled.
A broad range of drivers (libraries) and example code (sketches) is available for example for Arduino.
2 reviews for BMP280 Digital Pressure Sensor Breakout Board 1.8-3.6V, Barometer, Altimeter
Only logged in customers who have purchased this product may leave a review.
PDrolet –
I made an altimeter with a nano, in about 2 hours using this sensor. Wroked great. I get around +/- 1 feet of fluctuation at a fixed level. So precision is around 2 feets.
Jay Dee –
Works well with my arduino and produces results as expected.