CANADUINO ESP32 PLC-100 V1 (for Espressif ESP32-C6-DevKitC)

Description

Click here to support our crowdfunding campaign on Indiegogo.

CANADUINO ESP32 PLC-100 V1 is a ready assembled and tested new version of our 100x80mm small Programmable Logic Controller module. It adds Wi-Fi 6, Bluetooth 5, ZigBee, more memory and a lot more processing power to the familiar design.

The CANADUINO ESP32 PLC-100 V1 is a fully fitted, tiny Programmable Logic Controller for an Espressif ESP32-C6-DevKitC module (sold separately) and comes with a footprint of just 100 x 80mm. It offers a very affordable opportunity to add programmable controls to different kinds of applications and supports the most common wireless communication protocols.

ESP32 PLC-100 can be programmed using Arduino IDE, Open-PLC, different ladder programming tools, or code-free applications like Visuino from Mitov.

ESP32 PLC-100 is extremely budget-friendly and provides a multitude of functions and power compared to much more expensive PLCs from big brands like ABB or Siemens.

This version of our PLC-100 module has a Qwiic-compatible I2C connector (3.3V logic level) on board which allows for easy expansion with sensors, displays, or any other I2C compatible devices.

A high-precision RTC chip DS3231 supports you with scheduled and timer controlled applications.

A few use cases:

1. Closing the garage door after the car is parked in position and no movement is recorded for 2 minutes.
2. Starting background music with the garden watering 30 minutes after sunset when soil moisture is <20%.
3. Injecting water when the humidity in your smoker drops <60% but the temperature is >70C.

Basic features:

– Power supply 12*-24V DC, 0.5A
– 4 analog 0-10V inputs (adjustable res.)
– 4 analog 0-10V outputs (2.5mV res.)
– 4 digital inputs 3.3-24V
– 6 digital 250V/5A relay outputs
– I2C bus (3.3V) with Quiic connector for external sensors, displays etc.
– DS3231 real-time-clock with backup battery

The module is assembled and only requires an Espressif ESP32-C6-DevKitC module to be ready for your program development.

Buy here: Espressif ESP32-C6-DevKitC

Download a demo sketch to test inputs, outputs and the real-time-clock

*At 12V supply voltage, the maximum analog output voltage is limited to about 9.6V, which is still within the allowed tolerance for 0-10V systems. To achieve full 10V analog output voltage, the supply voltage must be at least 12.2V DC.