4 Relay Module 10A / 250V Opto-Isolated Inputs 3-24V for Arduino etc.
0 out of 5
CAD 4.95 CAD 3.96
Victoria Day Sale
ends May 20th
Availability: In stock
SKU: 26045
- Description
- Reviews (0)
Description
This 4 Relay Module needs a power supply of 5VDC. The opto-insulated inputs can handle 3-24VDC control voltage, with a maximum input current of 22mA at 24VDC.
A jumper can switch between 2 modes:
1. If the jumper cap is set to VCC and JD-VCC, relays and opto inputs are using the same 5VDC power supply.
2. If the jumper is open, a separated 5VDC power supply can drive the relays and the inputs are open for voltages up to 24VDC.
The inputs are LOW-active. It means the output of a microcontroller (like Arduino or Raspberry) draws the input current to GND. The LOW level activates the relay, and a high level (or 3-state level) deactivates the relay.
Be the first to review “4 Relay Module 10A / 250V Opto-Isolated Inputs 3-24V for Arduino etc.”
You must be logged in to post a review.
Related products
-
CANADUINO 4-Channel Stackable I2C Relay Shield for Arduino – DIY Kit
5.00 out of 5CAD 17.90CAD 14.32 -
-
CANADUINO 4-Channel WiFi Relay DIY soldering Kit (for Arduino)
5.00 out of 5CAD 23.90CAD 19.12 -
8 Relay Module Shield 10A with Optocoupler Inputs 3-24V
5.00 out of 5CAD 11.90CAD 9.52 -
2 pcs. Relay Module 5V for loads up to 10A / 250V (5V logic level input)
0 out of 5CAD 4.40CAD 3.52 -
8 Relay Shield for Arduino – I2C interface – stackable (DIY Kit)
0 out of 5CAD 23.90CAD 19.12 -
2 pcs. Relay Module 12V for loads up to 10A / 250V (5V logic level input)
0 out of 5CAD 4.30CAD 3.44 -
ESP-01 Relay Module for ESP8266 10A 250V max.
5.00 out of 5CAD 2.98CAD 2.38
Reviews
There are no reviews yet.