AD9833 Function Generator Module
0 out of 5
CAD 7.99 CAD 6.39
Victoria Day Sale
ends May 20th
Availability: In stock
SKU: 26458
- Description
- Reviews (0)
Description
AD9833 Function Generator Module is a low-power, programmable waveform generator capable of producing sine, triangular, and square wave outputs.
The output frequency and phase are software-programmable, allowing easy tuning. No external components are needed.
The frequency registers are 28 bits wide, and with the 25 MHz clock rate, a resolution of 0.1 Hz can be achieved.
AD9833 has a 3-wire serial interface (SPI). This serial interface operates at clock rates up to 40 MHz and is compatible with DSP and microcontroller standards.
The device operates on a 2.3 to 5.5V power supply and has a power-down function (SLEEP).
- Power Supply: 2.3 to 5.5V
- Current Consumption: typ. 4.5mA
- Output Frequency: 0 to 12.5MHz
- Output Waveform: Sine, Triangle, Square
AD9833 Arduino Libraries are available, for example on GitHub.
Be the first to review “AD9833 Function Generator Module”
You must be logged in to post a review.
Related products
-
Lithium Cell Charge Level Indicator – 1S Single Cell – 1 x 3.7V
0 out of 5CAD 3.80CAD 3.04 -
LED Battery Gauge for 1-8 Lithium Cells – Blue Display
0 out of 5CAD 2.95CAD 2.36 -
Square Wave Signal Generator 1Hz-150kHz / 0-100% Duty Cycle
5.00 out of 5CAD 5.96CAD 4.77 -
Green LED Battery Gauge for 1-8 Lithium Cells
5.00 out of 5CAD 2.95CAD 2.36 -
Digital LED Voltmeter 3-Digit (RED) 100VDC – Power Supply 4.5 to 30V
0 out of 5CAD 3.50CAD 2.80 -
Lithium Battery Charge Indicator – 2S Dual Cell – 7.4V
0 out of 5CAD 3.80CAD 3.04 -
DDS Function Generator DIY Soldering Kit with LCD
0 out of 5CAD 28.89CAD 23.11 -
Reviews
There are no reviews yet.