Allegro A3967 Motor Driver (stepper) Module max. 30V 0.75A
CAD 9.98 CAD 7.98
Victoria Day Sale
ends May 20th
- Description
- Reviews (0)
Description
The A3967 Motor Driver is a complete “micro-stepping” motor driver with a built-in translator. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and eighth-step modes, with an output drive capability of 30 V and 750 mA. The A3967SLB includes a fixed off-time current regulator that has the ability to operate in slow, fast, or mixed current decay modes.
This current-decay control scheme results in reduced audible motor noise, increased step accuracy, and reduced power dissipation.
The translator is the key to the easy implementation of the A3967 Motor Driver. By simply inputting one pulse on the STEP input, the motor will take one step (full, half, quarter, or eighth depending on two logic inputs).
There are no phase-sequence tables, high-frequency control lines, or complex interfaces to program. The A3967SLB interface is an ideal fit for applications where a complex Program is unavailable or over-burdened.
Internal circuit protection includes thermal shutdown with hysteresis, under-voltage lockout (UVLO) and crossover-current protection.
Special power-up sequencing is not required.
- 750 mA, 30 V Output Rating
- Automatic Current-Decay Mode Detection/Selection
- 3.0 V to 5.5 V Logic Supply Voltage Range
- Mixed, Fast, and Slow Current-Decay Modes
- Internal UVLO and Thermal Shutdown Circuitry
- Crossover-Current Protection
Easy to hook up, easy to use. Many sources with instructions and codes are available online.
Be the first to review “Allegro A3967 Motor Driver (stepper) Module max. 30V 0.75A”
You must be logged in to post a review.
Related products
-
RS232 to TTL adapter MAX232, provides RS232 port for MCU or Arduino
0 out of 5CAD 2.95CAD 2.36 -
16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685
0 out of 5CAD 11.95CAD 9.56 -
USB to RS485 Interface Adapter – 2 Wire – CH340 – Windows – Mac OS – Linux
5.00 out of 5CAD 3.45CAD 2.76 -
I2C Adapter for Character LCD – PCF8574 (A)
4.67 out of 5CAD 2.97CAD 2.38 -
ST-LINK V2 USB Programmer – Debugger
5.00 out of 5CAD 6.95CAD 5.56 -
TCA9548A I2C Multiplexer – Switch with 8 Channels – 1.65 to 5.5V
0 out of 5CAD 5.95CAD 4.76 -
Dual BTS7960 H-Bridge DC Motor Driver max. 43A
0 out of 5CAD 8.95CAD 7.16 -
CD74HC4067 16-Channel Analog Multiplexer / Demultiplexer
0 out of 5CAD 3.35CAD 2.68
Reviews
There are no reviews yet.